Add Muzi Base Uno and Base Duo board support#1746
Add Muzi Base Uno and Base Duo board support#1746johngag wants to merge 2 commits intomeshcore-dev:mainfrom
Conversation
New variant for the Muzi Works Base Uno (nRFLR1262, SX1262) and Base Duo (nRFLR1121, LR1121) boards. Both share the same PCB with QWIIC I2C, QSPI flash, USB-C, and battery management. The Duo reuses the Uno board class and pin definitions, differing only in the radio driver (CustomLR1110 vs CustomSX1262). Build environments per board: - repeater (headless), repeater_oled (with SSD1306 display) - companion_radio_usb, companion_radio_ble - room_server
|
Thanks for this, testing on DUO hardware it appears as though radio is only able to transmit, it's completely deaf on 915Mhz band. Any ideas? |
hmm, to be honest I only have an UNO to test it out. I think I have an idea why the DUO is not working. Let me trying to put something together. |
The LR1121 requires a DIO5/DIO6 RF switch table to switch between TX and RX modes. Without it the radio can transmit but is deaf on receive.
|
@thetooth Ok, I posted a fix for you to try. Let me know |
|
Tested and no change. There are no entries in the RX log or any errors/messages in the device log when sending from another device. I tested a completely fresh one since the DUO I was using had been set to 2.4Ghz before and maybe it was stuck in that mode but that's not the case. Looking at the noise floor value, it's -119dB and doesn't change so the RX is completely off, I'll play around with some things and report back if I can get it working. |
2 participants
New variant for the Muzi Works Base Uno (nRFLR1262, SX1262) and Base Duo (nRFLR1121, LR1121) boards. Both share the same PCB with QWIIC I2C, QSPI flash, USB-C, and battery management. The Duo reuses the Uno board class and pin definitions, differing only in the radio driver (CustomLR1110 vs CustomSX1262).
Build environments per board: