README.md adapted to server

console/executor_commands.cpp

@@ -27,7 +27,7 @@ namespace server {
 
 using system::config::printer;
 
-const std::string executor::name_{ "bn" };
+const std::string executor::name_{ "bs" };
 
 // Command line options.
 // ----------------------------------------------------------------------------

console/localize.hpp

@@ -33,7 +33,7 @@ namespace server {
 #define BS_SETTINGS_MESSAGE \
     "These are the configuration settings that can be set."
 #define BS_INFORMATION_MESSAGE \
-    "Runs a full bitcoin node."
+    "Runs a full bitcoin node server."
 
 // --initchain
 #define BS_INITIALIZING_CHAIN \

docs/configuration.md

@@ -0,0 +1,261 @@
+# Configuration
+
+libbitcoin-server `bs` can be configured in many different ways. Although it can be started without any parameters without issues, it is recommended to adjust the basic parameters to the underlying system and your own requirements.
+
+You can do this by passing a config file to the server at start with the following command:
+
+```sh
+$ ./bs --config ./bs.cfg
+```
+## Config File Structure
+The libbitcoin configuration file, referred to below as `bs.cfg`, follows the following structural format:
+
+```
+[section]
+parameter = value
+
+[section2]
+parameter2 = value
+```
+The configuration includes the following sections:
+
+- **[log]**
+  Controls the content and target directories of the log files.
+- **[database]**
+  Configuration of the store. Primarily specifying the storage location.
+- **[bitcoin]**
+  Blockchain-specific settings,
+- **[node]**
+  Configuration of the node. Number of threads, number of parallel block downloads, etc.
+- **[network]**
+  General network settings, from the user agent string to blacklists.
+- **[outbound]**
+  Control of P2P network behavior.
+- **[inbound]**
+  TBD
+- **[manual]**
+  TBD
+- **[web]**
+  TBD
+- **[explore]**
+  TBD
+- **[socket]**
+  TBD
+- **[bitcoind]**
+  TBD
+- **[electrum]**
+  TBD
+- **[stratum_v1]**
+  TBD
+- **[stratum_v2]**
+  TBD
+- **[forks]**
+  TBD
+
+There can be multiple occurences of each section, `bs` will still parse all parameters.
+
+## Sample Configurations
+The following sample configurations can be used to start libbitcoin server `bs`. Note that even with these samples, at least the path names and IP addresses must be adjusted.
+
+Use the following config settings to set up the libbitcoin server for milestone sync:
+
+<details>
+<summary><b>libbitcoin-server configuration milestone sync</b></summary>
+
+```
+[log]
+path = /home/user/libbitcoin/log
+maximum_size = 10000000
+
+application = true
+news = true
+session = true
+protocol = false
+quitting = false
+proxy = false
+remote = true
+fault = true
+verbose = false
+#objects = false        # debug builds only
+
+[database]
+path = /home/user/libbitcoin/blockchain/bitcoin
+
+[bitcoin]
+#checkpoint = 000000000019d6689c085ae165831e934ff763ae46a2a6c172b3f1b60a8ce26f:0
+#milestone  = 000000000019d6689c085ae165831e934ff763ae46a2a6c172b3f1b60a8ce26f:0
+
+[node]
+threads = 32
+thread_priority = true
+memory_priority = true
+
+# delay_inbound = true will reject inbound requests until node is current. Speeds up IBD.
+delay_inbound = true
+
+# Number of concurrent blocks 
+maximum_concurrency = 50000
+
+# Maximum Block Height. Use this for performance testing only.
+#maximum_height = 900000
+
+[network]
+#path = /home/user/libbitcoin/network
+# Thread count should the number of cores of the corresponding system
+threads = 16
+user_agent = "/libbitcoin4:0.14.2/"
+
+# Blacklisted peers due to protocol violation, version message, incoming, ...
+blacklist = 143.20.137.191
+blacklist = 143.20.137.34
+blacklist = 87.229.79.163
+blacklist = 87.229.79.127
+blacklist = 87.229.79.102
+blacklist = 31.58.215.119
+blacklist = 31.58.215.74
+
+[outbound]
+# Max number of peer connections
+connections = 100
+
+# Max number of addresses in the host pool
+host_pool_capacity = 10000
+
+connect_batch_size = 5
+
+[inbound]
+# mainnet:  8333, testnet: 18333, regtest: 18444
+connections = 0
+enable_loopback = false
+bind = [::]:8333
+bind = 0.0.0.0:8333
+```
+
+</details>
+<br>
+
+Use the following config settings to setup libbitcoin server for full validation sync:
+
+<details>
+<summary><b>libbitcoin-server configuration full validation sync</b></summary>
+
+```
+[log]
+path = /home/user/libbitcoin/log
+maximum_size = 10000000
+
+application = true
+news = true
+session = true
+protocol = false
+quitting = false
+proxy = false
+remote = true
+fault = true
+verbose = false
+
+[database]
+path = /home/user/libbitcoin/blockchain/bitcoin
+
+[bitcoin]
+checkpoint = 000000000019d6689c085ae165831e934ff763ae46a2a6c172b3f1b60a8ce26f:0
+milestone  = 000000000019d6689c085ae165831e934ff763ae46a2a6c172b3f1b60a8ce26f:0
+
+[node]
+threads = 32
+thread_priority = true
+memory_priority = true
+
+delay_inbound = true
+
+maximum_concurrency = 50000
+
+[network]
+threads = 16
+user_agent = "/libbitcoin4:0.14.2/"
+
+blacklist = 143.20.137.191
+blacklist = 143.20.137.34
+blacklist = 87.229.79.163
+blacklist = 87.229.79.127
+blacklist = 87.229.79.102
+blacklist = 31.58.215.119
+blacklist = 31.58.215.74
+
+[outbound]
+connections = 100
+
+host_pool_capacity = 10000
+
+connect_batch_size = 5
+
+[inbound]
+connections = 0
+enable_loopback = false
+bind = [::]:8333
+bind = 0.0.0.0:8333
+```
+</details>
+<br>
+
+Add the following settings to one of the configs above in order to add client-server endpoints: **(Work in progress/experimental)**
+
+<details>
+<summary><b>libbitcoin-server endpoint configuration</b></summary>
+
+```
+[manual]
+# TBD
+
+[web]
+# Web User Interface (http/s, stateless html)
+# Ports: 8080/8443 (non-default, prioritizes explore)
+
+path = /home/user/libbitcoin/server/www
+default = ws.html
+server = libbitcoin/web
+connections = 100
+bind = 0.0.0.0:8080
+bind = [::]:8080
+
+[explore]
+# Native RESTful Block Explorer (http/s, stateless html/json)
+# Ports: 80/443 (use default)
+
+bind = 0.0.0.0:8181
+bind = [::]:8181
+connections = 100
+path = /home/user/libbitcoin/server/www
+default = index.html
+
+[socket]
+# Native WebSocket Query Interface (http/s->tcp/s, json, upgrade handshake)
+bind = 192.168.0.126:82
+connections = 0
+
+[bitcoind]
+# bitcoind compatibility interface (http/s, stateless json-rpc-v2)
+# TLS not integrated, no default ports.
+connections = 0
+
+[electrum]
+# electrum compatibility interface (tcp/s, json-rpc-v2)
+# clear:50001
+# TLS  :50002
+
+bind = 192.168.0.126:8480
+connections = 0
+
+[stratum_v1]
+# stratum v1 compatibility interface (tcp/s, json-rpc-v1, auth handshake)
+# common default: 3333
+bind = 192.168.0.126:8580
+connections = 0
+
+[stratum_v2]
+# stratum v2 compatibility interface (tcp[/s], binary, auth/privacy handshake)
+# common default: 3336
+bind = 192.168.0.126:8690
+connections = 0
+```
+</details>