Bypass VAC

Agents.md

@@ -0,0 +1,107 @@
+# SnapKey v1.2.9 Agents 自动化修改规范
+
+## 1. VAC Bypass 配置可调（config.cfg 可选项）
+
+### 目标
+
+* 允许**VAC绕过A/B**功能在`config.cfg`配置文件中保存其开关状态。
+* 允许**两个模式下所有Sleep延迟**范围可在配置文件调整（区分A/B模式）。
+
+### 配置文件示例（新增段落）
+
+```ini
+# VAC Bypass 配置
+vac_bypass_a = 1        # 1=启用 0=关闭
+vac_bypass_b = 0        # 1=启用 0=关闭
+
+# VAC Bypass 延迟设置（单位：毫秒）
+vac_a_min_delay = 15    # A模式最低 overlap 延迟
+vac_a_max_delay = 35    # A模式最大 overlap 延迟
+
+vac_b_min_delay = 5     # B模式最小释放-按下间隔
+vac_b_max_delay = 15    # B模式最大释放-按下间隔
+```
+
+* **默认值**见上。
+* **禁止负数、最大最小颠倒。**
+* 未设置时，按默认值初始化。
+
+---
+
+## 2. 延迟生成随机数机制升级
+
+### 目标
+
+* 所有 VAC 绕过相关的延迟逻辑全部替换为 C++11 标准 `std::mt19937`（Mersenne Twister）+ `std::chrono`。
+* 不允许使用 C 的 `rand()`，保证多线程/多实例下延迟分布均匀无碰撞。
+
+### 必须实现
+
+* 延迟取值每次都要走同一 `std::mt19937` 实例（优先全局静态），用 `std::random_device` 进行 seed。
+* **调用样例：**
+
+  ```cpp
+  static std::mt19937 rng(std::random_device{}());
+  std::uniform_int_distribution<int> dist(min, max);
+  int delay = dist(rng);
+  std::this_thread::sleep_for(std::chrono::milliseconds(delay));
+  ```
+
+---
+
+## 3. VAC 绕过菜单状态和图标动态切换
+
+### 目标
+
+* **新增一个 icon\_vac\_bypass.ico（128x128）**
+
+  * 图案要求：
+
+    * 大号 VAC 字母（可参照 Valve Anti-Cheat 原色），下方画一个长水平箭头（建议 **→ 或 --**> 结构，强调“穿透/绕过”意象）
+    * 图标风格必须“和 icon.ico、icon\_off.ico 一致”，不可过于复杂，保证 16x16 到 128x128 兼容缩放。
+* **图标切换规则：**
+
+  * **SnapKey 启用**，且**任一 VAC bypass 功能启用**：显示 icon\_vac\_bypass.ico
+  * **SnapKey 禁用**（isLocked=true）：只显示 icon\_off.ico（无论VAC选项）
+  * 其它情况仍为普通 icon.ico
+* 菜单栏**VAC bypass A/B 状态**同步菜单打钩与图标状态。
+
+---
+
+## 4. 稳定性与兼容性要求
+
+* 任何图标读取失败时，fallback 到 icon.ico，不允许图标状态丢失或崩溃。
+* 菜单状态与配置文件保持一致（修改菜单选项应自动写回 config.cfg，重启自动读取）。
+* 保持原有的托盘右键菜单逻辑和热键绑定管理不变。
+
+---
+
+## 5. agents.md 生成自动化流程推荐
+
+（适合 CI/CD 或脚本辅助开发环境）
+
+1. 检查 config.cfg 是否存在上述新段落。不存在则自动补全默认项。
+2. 替换所有 `Sleep(rand() % X)` 为 std::mt19937 + chrono 方案。
+3. 更新 Tray 菜单栏，VAC bypass A/B 绑定菜单、菜单项与 config 状态同步。
+4. 插入图标切换判定逻辑：任一绕过启用 && SnapKey 启用 → icon\_vac\_bypass.ico，否则按旧逻辑。
+5. 变更或菜单开关时自动写 config.cfg。
+6. 自动检测并加载 icon\_vac\_bypass.ico，找不到 fallback。
+7. 强制所有配置解析后做一次合法性检查（无效配置自动回落到默认）。
+8. 不影响原有 Group/Key 配置、版本信息、帮助菜单等其它业务。
+
+---
+
+## 6. icon\_vac\_bypass.ico 设计（AI自动化图标生成描述）
+
+**prompt：**
+
+```
+A 128x128 Windows .ico file with large bold letters "VAC" in white or pale blue, on a dark or black background. Below the letters, a thick, clear, horizontal arrow (→ or --__>) passes underneath, visually suggesting "bypass" or "tunneling". The style should match classic tray icons—minimal, high-contrast, not cartoonish. Keep the icon readable at 16x16. 
+```
+
+---
+
+## 7. 其它说明
+
+* 所有自动化脚本与补丁操作**必须**严格遵循此 agents.md。
+* 具体代码注释需要使用英语

Build SnapKey/CMAKE-Build/CMake-Build.bat

@@ -1,14 +1,28 @@
 @echo off
+setlocal
+
+rem ========== ·������ ==========
+set THISDIR=%~dp0
+set CMAKE=%THISDIR%cmake-4.1.0-rc2-windows-x86_64\bin\cmake.exe
+set MINGW=%THISDIR%mingw64
+set PATH=%MINGW%\bin;%PATH%
+
+rem ========== ������� ==========
+echo [+] Configuring CMake...
+"%CMAKE%" -S "%THISDIR%..\.." -B "%THISDIR%build" -G "MinGW Makefiles"
+
+if %errorlevel% neq 0 (
+    echo [!] CMake configure failed.
+    pause
+    exit /b 1
+)
+
+echo [+] Building with MinGW...
+"%CMAKE%" --build "%THISDIR%build"
+
+if exist "%THISDIR%build\SnapKey.exe" (
+    copy /Y "%THISDIR%build\SnapKey.exe" "%THISDIR%" >nul
+)
 
-mkdir build > nul
-cd build > nul
-echo [+] Preparing files...
-cmake .. > nul
-echo [+] Compiling...
-cmake --build . > nul
-cd .. > nul
-move "build\Debug\SnapKey.exe" "." > nul
 echo [+] Done!
-rmdir /s /q build > nul
-echo [+] Press a key to exit...
-pause > nul
+pause

Build SnapKey/CMAKE-Build/CMakeLists.txt

@@ -9,7 +9,7 @@ set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /MT")
 set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /MTd")
 set(BUILD_SHARED_LIBS OFF)
 
-add_executable(SnapKey SnapKey.cpp resources.rc)
+add_executable(SnapKey WIN32 SnapKey.cpp resources.rc)
 
 if (WIN32)
     set_target_properties(SnapKey PROPERTIES

README.md

@@ -1,4 +1,4 @@
-[![testsnap](https://github.com/user-attachments/assets/e9a23ba9-d394-4711-abfc-994932605d86)](https://github.com/cafali/SnapKey/releases)
+<img width="1200" height="675" alt="disconnected_with_ban_centered_aa" src="https://github.com/user-attachments/assets/6785c5cd-f4ab-4752-aa66-b64544b8fb92" />
 
 **About SnapKey** 
 --------------------------------------------------------------------------------------------------
@@ -10,7 +10,28 @@ SnapKey is a lightweight, open-source tool that operates from the system tray an
 
 [![COMPATIBLE](https://github.com/user-attachments/assets/069a7a23-cfe4-47eb-8ac2-05872fcc2028)](https://github.com/cafali/SnapKey/wiki/Compatibility-List)
 
+### **New in v1.2.9 – Experimental VAC/CS2 Bypass Modes 🚫🎮**
 
+---
+
+SnapKey v1.2.9 introduces two **experimental bypass modes** aimed at improving compatibility with games that impose stricter input policies, such as **Counter-Strike 2 (CS2)**. These modes can be toggled independently in the configuration file and allow SnapKey to remain active while circumventing CS2’s built-in restrictions on background input automation.
+
+> ⚙️ **VAC Bypass A** — Simulates real-time user input using a lower-level system call chain.
+> ⚙️ **VAC Bypass B** — Uses synthetic input injection with randomized timings to mimic human behavior more accurately.
+
+Both modes are entirely optional and **disabled by default**. When enabled, SnapKey will change its tray icon to indicate **VAC bypass mode** is active:
+
+* ✅ A curved arrow wrapping around the "VAC" label appears.
+* ⛔ This visually reminds users that advanced compatibility workarounds are enabled.
+<img width="239" height="274" alt="image" src="https://github.com/user-attachments/assets/a1019787-0420-49e6-aa87-1e79f78bb66c" />
+
+> \[!WARNING]
+> These features are **experimental** and **not officially endorsed by Valve or any game publisher**. While SnapKey does not directly modify any game files or memory, **use of automation tools may still violate Terms of Service** for certain games.
+> **Use at your own risk.**
+
+For details on how these bypass modes work and how to enable them, refer to the [**Bypass Modes Wiki Page**](https://github.com/cafali/SnapKey/wiki/VAC-Bypass-Modes).
+
+---
 
 Download
 --------------------------------------------------------------------------------------------------
@@ -120,12 +141,13 @@ Looking for More Information? Got Questions or Need Help?
 
 <p align="center">
   <a href="https://github.com/cafali">@cafali</a> 
-  <a href="https://github.com/minteeaa">@minteeaa</a> 
+  <a href="https://github.com/minteeaa">@minteeaa</a>
+  <a href="https://github.com/felix3322">@felix3322</a>
   <a href="https://github.com/Yaw-Dev">@Yaw-Dev</a>
 </p>
 
 <p align="center">
-  <a href="https://github.com/cafali/Snapkey/graphs/contributors">
-    <img src="https://contrib.rocks/image?repo=cafali/Snapkey" />
+  <a href="https://github.com/felix3322/Snapkey/graphs/contributors">
+    <img src="https://contrib.rocks/image?repo=felix3322/Snapkey" />
   </a>
-</p>
+</p>