docs: fixes formatting in memorybank.md

docs/library/memorybank.md

@@ -3,26 +3,29 @@
 The MemoryBank library allows you to manage paged memory on 128K and later/compatible models.
 
 This library includes three commands:
-- [SetBank](memorybank/setbank.md): Sets the specified bank to memory location $c000.
-- [GetBank](memorybank/getbank.md): Returns the memory bank that is located at memory location $c000.
-- [SetCodeBank](memorybank/setcodebank.md): Copies the specified memory bank to location $8000
+
+* [SetBank](memorybank/setbank.md): Sets the specified bank to memory location $c000
+* [GetBank](memorybank/getbank.md): Returns the memory bank that is located at memory location $c000
+* [SetCodeBank](memorybank/setcodebank.md): Copies the specified memory bank to location $8000
 
 Only works on 128K and later/compatible models.
 
 **Danger:** If our program exceeds the address $c000 it may cause problems, use this library at your own risk.
 
 
-## Menory banks
-- $c000 > Bank 0 to Bank 7
-- $8000 > Bank 2 (fixed)
-- $4000 > Bank 5 (screen)
-- $0000 > ROM
+## Memory banks
+
+ - $c000 > Bank 0 to Bank 7
+ - $8000 > Bank 2 (fixed)
+ - $4000 > Bank 5 (screen)
+ - $0000 > ROM
 
 Banks 2 and 5 are permanently fixed at addresses $8000 and $4000, so it is not common to use them.
 
 Banks 1, 3, 5 and 7 are banks in contention with the ULA, their use is not recommended in processes requiring maximum speed.
 
 ## See also
+
 - [SetBank](memorybank/setbank.md)
 - [GetBank](memorybank/getbank.md)
 - [SetCodeBank](memorybank/setcodebank.md)